2024 Mi-T-M Air Compressor / Generator / Welders AGW-SM14-B

Information

2024 Mi-T-M Air Compressor / Generator / Welders AGW-SM14-B

Two Stage Gasoline Base-Mount - AGW-SM14-B

AGW-SM14-B

This AGW Series combines an air compressor, generator and welder into one machine, making it the complete on-site unit to efficiently tackle numerous jobs at once.

Compressor Pump

Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Generator

Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder

Amperage selection switch, 170A or 220A maximum

Frame

Powder coated two-piece belt guard

Components

Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16 1/2-inch fly wheel

AGW Series Operation

Generator Mode

AC current only · Selector switch set to idle down · Switch is set to full throttle

Welder Mode

DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

Photos

Highlights

  • Houston, Texas
  • 2024
  • Mi-T-M
  • Air Compressor / Generator / Welders AGW-SM14-B
  • Mi-T-M OHV
  • Available
  • 22.00 in.
  • 28.50 in.

    • Specifications

    • 2024
    • Mi-T-M
    • Air Compressor / Generator / Welders
    • AGW-SM14-B
    • General
    • Mi-T-M OHV
    • 420cc
    • Electric
    • 3600 RPM
    • Max. AC Output: 5000 watts | Rated AC Output: 4500 watts | Frequency/Voltage: 60Hz/120V/240V | Max. Amps (120V/240V): 41.5/20.8 Off-Load | Cont. Amps (120V/240V): 37.5/18.8 Off-Load | Duty Cycle (10 Min. Run Time): 150A @ 100% | DC Voltage: 50-170A Working Range
    • Cont. On-Load @ 90 PSI / 175 PSI: 3000 watts / 2500 watts
    • CFM @ 90 PSI: 16.4 | CFM @ 175 PSI: 15.7
    • 49.00 in.
    • 22.00 in.
    • 28.50 in.
    • Tank Size: Not Applicable - Base-Mount Model | Fuel Tank: 1.85-gallon
    • Net: 384.00 lbs.
    • 449.00 lbs.